HONSFUID / TRAVEL
Tracked travel drive
Match two-displacement motor, reduction gear and sprocket to the travel speed target.
HONSFUID / SCHEMATICS
Project schematics
01Target 4–4.5 km/h
02Motor 196.2 / 91.6 cm³/rev
03Ratio 49.95 · sprocket 594 mm
Public functional circuit
Functional diagram showing power and control paths. It is not an ISO 1219 installation schematic. Use approved project drawings for ports, valve positions, safeguards and settings.
ENGINEERING
Control logic
Use actual flow to one side to calculate motor speed and road speed. Check split flow, braking, hill holding, shift conditions and slip separately.
Design inputs
Design input / verify per project
COMPONENTS
Products and selection
- Travel valve / manifold160 L/min per-section requirement to verify
- Two-displacement motorProject input 196.2 / 91.6 cm³/rev
- Holding componentsSelect only after brake circuit review
Products are candidate configurations. Confirm ratings, interfaces and compatibility with approved catalogs.
View catalog